GE Fanuc IC610PRG105 Series One Plus Hand-held Programmer with Keylock

IC610PRG105 is the hand-held programmer with keylock for Series One and Series One Plus controllers. GEK-90842C lists it as required for Series One Plus; it enters, examines and edits the program held in the connected controller.

IC610PRG105 provides RUN, PRG and LOAD selections through a three-position keyswitch. RUN permits logic execution and monitoring, PRG permits edits without solving logic, and LOAD selects external-peripheral operations through the tape port.

IC610PRG105 has a four-digit address/data display, five status LEDs and sixteen logic display LEDs. These indicate the connected controller’s program and operating information; they are not additional field I/O channels or a separate CPU memory capacity.

IC610PRG105 is listed in GEK-90842C Table 3-5 with a load of six units at +5 V and five units at +9 V. Include this programmer load in the applicable rack power budget when it is connected.

IC610PRG105 can monitor I/O status, register contents and accumulated timer/counter values in the connected controller. The mode selection governs the permitted operation; RUN allows monitoring while preventing changes to the control logic.

IC610PRG105 uses the F and R keys for Series One Plus data operations. GEK-90842C states that these keys have no effect when programming Series One, so their function depends on the connected controller family.